Related Manuals for Aussie Eco-Clean Concept F140
Summary of Contents for Aussie Eco-Clean Concept F140
-
Page 1: Instruction Manual
March 09 Domestic Cold Water High Pressure Cleaner Instruction Manual Aussie Eco-Clean Concept F140 Please read this manual before using the machine. - Page 2 Let’s Clean up Australia with an Aussie Eco-Clean Concept F140 Congratulations on your acquisition of a top quality Aussie Concept F140 2,000 psi high pressure water blaster. This machine offers users a wide range of features that make cleaning tasks a breeze.
-
Page 3: Warranty
Domestic machines (i.e. Concept F140) which are used in commercial service are warranted for a period of three months from date of purchase. Commercial service is deemed to occur where the... - Page 4 Use only extension cords having an electrical rating not less than the rating of the product (refer this manual). An improper gauged extension cord will cause drop in wire voltage resulting in loss of power and overheating. Concept F140 Cold Water Pressure Cleaners – March 09 Page 4 of 12...
- Page 5 Only carry out maintenance or repairs described in this manual. ALL other work should be performed by your local authorised Aussie Pumps Service Agent. The power cable may only be repaired or replaced by an authorised Aussie Pumps Service Agent.
-
Page 6: Product Information
3/8 male/male nipple (joins high pressure hose to gun) Vario nozzle Turbo nozzle High pressure hose High pressure hose connection (outlet) Water inlet (mains connection) On/off switch for pump motor group Electrical cable Concept F140 Cold Water Pressure Cleaners – March 09 Page 6 of 12... - Page 7 (1) or turbo nozzle (2) into the high pressure gun (3) until black coupling is tight. Fig. 4 IMPORTANT: The machine must only be operated in an upright position. Concept F140 Cold Water Pressure Cleaners – March 09 Page 7 of 12...
-
Page 8: Start-Up Procedure
The turbo nozzle is a non-adjustable nozzle pattern which comes out in a conical (cone shaped style pattern). This different style of pattern allows quicker cleaning of large surface areas including paved areas, concrete areas, driveways, etc. Fig. 6b Concept F140 Cold Water Pressure Cleaners – March 09 Page 8 of 12... - Page 9 If the detergent is too thick, this will cause blockage through the detergent injector (Fig. 7). Step 2: - The vario nozzle on the Concept F140 has a separate extreme low pressure function which creates a venturi (suction feed) to allow the detergent to self feed through the Fig.
-
Page 10: Care And Maintenance
WARNING: Ensure the plug is removed from socket before carrying out any maintenance, adjustment or servicing. 1. Storage: Store your Aussie-Eco Clean blaster in an upright position. If there is a danger of freezing have your local authorised Aussie Pumps Service Agent inspect unit before next operation. -
Page 11: Spare Parts
Major seal kit FKTRI64832 Manifold kit (Kit E) FKTRI83733 T10 vario zoom nozzle & lance C4723.45.115 Aussie Turbo master turbo lance CTN140-035 C4333.13 Hose AHOSEABB100 Switch FMECI90213 Concept F140 Cold Water Pressure Cleaners – March 09 Page 11 of 12... -
Page 12: Troubleshooting
Part No. FTBAP53255 Part No. C1610.00 Suits F140 (This part requires lance and connecting nipple when ordering.) AUSSIE PUMP SAVER - Line Strainer Suits all units. Part No. MPA28030020P RELIABLE PRODUCTS ... RELIABLE PEOPLE AUSTRALIAN PUMP INDUSTRIES PTY LTD ABN 79 061 619 234...
Need help?
Do you have a question about the Eco-Clean Concept F140 and is the answer not in the manual?
Questions and answers