Adding And Erasing Channels Manually - Toshiba 46HM84 Service Manual

Adding and erasing channels manually

After you have programmed the channels automatically, you can
manually add or erase specific channels.
To add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight ADD/ERASE, and then press ENTER
to display the pull-down menu.
SET UP
LANGUAGE
CLOCK SET
ANT 1 / 2
TV / CABLE
CH PROGRAM
ADD / ERASE
: S E L E C T ENTER : SET
4. Press y or z to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1-4 for other channels you want to add or erase.
Changing channels
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100).
For channels 100 and higher press the 100 button and then the
A D D
E R A S E
- 11 -
Control touchpad on TV front
TV/VIDEO EXIT CHANNEL VOLUME
x •zy
POWER
RECALL
TV/VIDEO
INFO
1 2 3
4 5 6
Channel
8 9
7 Number
+10 CHRTN
100 0
ENT
FAV
MENU
MENU
DVDMENU yzx •
FAV
ENTER
TV
CBL/SAT CH VOL
Channel yz
VCR
DVD
POP DIRECT CH MUTE SLEEP
MENU
MENU