1. MANUAL Thank you for buying a repeater at the GSM Repeater Shop. We sell high-quality, interference-free and energy-efficient equipment with CE markings. For quick and easy installation of your device, you can of course rely on the service of GSM Repeater Shop. You should be able to get coverage pretty much anywhere.
UNWRAPPING 2.1.1 For the Model 1 repeaters: C10H-GSM, C10H-DCS, C10H-GD, C10H-WCDMA, C10H-GW, C15H-GSM, C15H-DCS, C15H-GD THE REPEATER SET CONSISTS OF 1. Repeater. 2. Black 220-240 Volt battery (2 parts). 3. Outdoor antenna with about 10 metres of coaxial cable (the end of the cable of your connector may differ from the photograph above).
2.1.2 For the Model 2 repeaters: C10-GSM, C10-DCS, C10-GD, C20-GSM, C20-DCS, C20-WCDMA, C20C-GD Model C20C ED THE REPEATER SET CONSISTS OF 1. Repeater. 2. Black 220-240V battery (2 parts). 3. Outdoor antenna with about 10 metres of coaxial cable. 4. Telescopic/Whip indoor antenna. (the end of the cable of your connector may differ from the photograph above).
2.1.3 For the Model 3 repeaters: C10D-GDW, C20D-GDW THE REPEATER SET CONSISTS OF 1. Yagi Logarithm outdoor antenna 2. Indoor antenna, to be mounted on the wall 3. Repeater 4. Low loss coaxial cable (around 10 metres) 5. 220 V adapter 6.
2.2 WHERE IS MY TRANSMISSION TOWER LOCATED? There are a number of ways to determine the best place for the outdoor antenna. Below you will find several free apps that you can download which will measure the quality of the incoming signal in different locations on and around the building.
2.3 Placing and aiming the outdoor antenna and installing the repeater PLACE YOUR ANTENNA AS HIGH UP AS POSSIBLE This part of the installation process is very important. If the reception isn’t good outdoors, it will not be good indoors. This is also the case if you live in a rural, wooded area. Trees absorb the GSM signal, which reduces the quality considerably.
2.4 Connection 1. Screw the telescopic indoor antenna into the ‘Output’ connection point on the repeater. 2. Run the cable from the outdoor antenna to the desired location of the repeater. Make sure that you have enough distance (at least 5 to 10 metres). There should be at least one brick/steel wall/floor in between the indoor and outdoor antenna.
Table of contents 2.5 Calibrating the equipment 2.5.1: For the Model 1 repeaters: C10H-EGSM, C10H-DCS, C10H-WCDMA, C10C-F, C15H-DCS, C15H-GD 2.5.2: For the Model 2 repeaters: C15 EGSM, C10 ED, C10 EW, C20 EGSM, C20-DCS, C20-WCDMA 2.5.3: For the Model 3 repeaters:...
2.5 Calibrating the equipment 2.5.1 For the Model 1 repeaters: C10H-EGSM, C10H-DCS, C10H-WCDMA, C10C-F, C15H-DCS , C15H-GD 1. If the indicator lights are green or green/orange, the signal is at its best. You do not have to do anything. 2. If the indicator lights are all orange, you have a little too much signal, but the device is functioning properly.
2.5.2 For the Model 2 repeaters: C15 EGSM, C10 ED, C10 EW, C20 EGSM, C20-DCS, C20-WCDMA 1. Your repeater has Automatic Gain Control. This makes installing it even easier. 2. If the indicator lights are green or green/orange, the signal is at its best. You do not have to do anything.
2.5.3 For the Model 3 repeaters: ED13-F, EW13-F, C15C ED, C15C-ED, C15C-EW, C20C-EGSM, C20C- EW, C20C ED, C20/24/27 ED, C20/24/27 EW, C10/20/24D-EDW, C10/20/24D-GDW 1. If the indicator lights are green or green/orange, the signal is at its best. You do not have to do anything.
Need help?
Do you have a question about the C10H-EGSM and is the answer not in the manual?
Questions and answers