KenkoAir Purifier combines a multiple-stage air filter with negative-ion generation and effectively ozone-free operation. The KenkoAir Purifier features an ultra low penetration air filter. ULPA technology is a breakthrough in air filtration — significantly more effective than a HEPA filter, the longtime standard for hospital operating rooms, microassembly clean rooms and nuclear laboratories.
Page 3
Glossary Description of device Warning and precautions Operating information Setup instructions Operating instructions Maintenance Filter replacement Troubleshooting Warranty Allergen — A substance that can cause an allergy, specifically a non-parasitic antigen capable of stimulating a hypersensitivity reaction. HEPA – High efficiency particulate air, a type of filter technology. This filter is designed to trap particles as small as 0.3 microns in size.
Components 1. Prefilter (reusable) 2. Deodorizing filter (replaceable) 3. ULPA filter (replaceable) 4. High-efficiency fan 5. Air quality sensor DESCRIPTION OF DEVICE...
Page 5
5. Timer button — Allows the unit to operate for a set period (three hours) and then shut off automatically. 6. Filter life indicator — Shows when filter elements require replacing. Product Specifications Model: Nikken KenkoAir Purifier™ Electric power: 120 volts AC, 60 hertz Power consumption: 55 watts Weight: 13.9 lb/6.3 kg Dimensions: Width 14.8 inches/37.5 cm...
Page 6
6. Always turn the unit off and unplug it from the wall when not in use for a long period of time. 7. To unplug the KenkoAir Purifier, first turn the power off. Grasp the plug and pull it from the wall outlet. Never unplug the unit by pulling on the cord.
21. Do not operate near a kitchen vent. 22. Do not expose the KenkoAir Purifier to rain, or use near water, in a bathroom, laundry area or other damp location. 23. Do not allow foreign objects to enter the ventilation or exhaust opening, as this may cause electric shock or damage to the product.
The reusable prefilter should be cleaned every two months, or when the filter life indicator on the control panel is flashing. 1. Remove the front panel of the KenkoAir Purifier as described below in the Replacing Filters section. Detach the prefilter as described.
4. Place in filter enclosure. 4. Replace the front panel. The replacement pack for this product is the KenkoAir Purifier deodorizing filter and ULPA filter, item #1444. • Unit will not operate.
Need help?
Do you have a question about the KenkoAir and is the answer not in the manual?
Questions and answers