Reversible doors Description of the appliance, 5 Overall view Start-up and use, 6 Starting the appliance Using the refrigerator to its full potential Using the freezer to its full potential Maintenance and care, 7 Switching the appliance off Cleaning the appliance...
Levelling 1. Install the appliance on a level and rigid floor. 2. If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet. Electrical connections After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains.
Page 3
Fitting a new plug IMPORTANT: : : : : WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE... Green and Yellow - Earth Blue - Neutral Brown - Live As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: Connect Green and Yellow wire to terminal marked...
Reversible doors Warning: Before attempting to remove the door, switch off the electrical supply and pull out the mains plug. It is recommended that you remove any loose items/fittings from inside the appliance and place food into insulated containers whilst carrying out this operation. You may require assistance to carefully lay the appliance onto its back onto suitable protective materials (i.e.
Description of the appliance Overall view The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. TEMPERATURE control FREEZER and STORAGE compartment SHELVES• Drain for DEFROST WATER FRUIT and VEGETABLE bin Levelling FEET •...
We recommend, however, a medium position. The cooling section of the refrigerator is located inside the back wall of the refrigerator compartment for increased space and improved aesthetics. During...
• The appliance is manufactured with hygienic materials which are odour free. In order to maintain an odour free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly. • If you want to switch the appliance off for an extended period of time, clean the inside and leave the door open.
If circulation is impeded, the compressor will work continuously. • Do not place hot food directly into the refrigerator. The internal temperature will increase and force the compressor to work harder and will consume more energy.
• The refrigerator have been over-filled. • The TEMPERATURE ADJUSTMENT knob is not in the correct position. • The food is in contact with the back inside wall of the refrigerator. • The door is not closed properly or is continuously opened.
• appliance model (Mod.) • serial number (S/N) This information can be found on the data plate located on the bottom left side of the refrigerator compartment. Never call on unauthorized technicians and always refuse spare parts which are not originals. model 93139180000...
Page 12
195051962.00 03/2005 - Xerox Business Services...
Need help?
Do you have a question about the TFA1 and is the answer not in the manual?
Questions and answers