Table of Contents
Advertisement
Quick Setup Guide
5. Turn on the Power switch.
The power LED should
light red.
6. Rotate the Monitor selector
switch to the desired Line
position. Line 1 = phone
line connected to RJ-11
marked Line 1.
7. Press the Add button.
This will take the selected
line off-hook. The
corresponding Line LED
will light green.
8. Dial the call with the DTMF keypad.
You may now communicate with the called party on Line
1 through the Monitor handset or equipment connected to
the Monitor Send and Receive SLR jacks (optional).
Repeat steps 6-8 for Lines 2-4.
5
Advertisement
Table of Contents
