Specific Safety Rules And Symbols - Hitachi CR 13VB Instruction Manual And Safety Instructions

English

SPECIFIC SAFETY RULES AND SYMBOLS

1. Hold power tool by insulated gripping
surfaces when performing an operation
where the cutting tool may contact
hidden wiring or its own cord. Contact
with a "live" wire will make exposed
metal parts of the tool "live" and shock
the operator.
2. Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the work by
hand or against your body leaves it
unstable and may lead to loss of control.
3. ALWAYS wear ear protectors when
using the tool for extended periods.
Prolonged exposure to high
intensity noise can cause
hearing loss.
4. NEVER touch moving parts.
NEVER place your hands, fingers or
other body parts near the tool's moving
parts.
5. NEVER operate without all guards in
place.
NEVER operate this tool without all
guards or safety features in place and
in proper working order. If maintenance
or servicing requires the removal of a
guard or safety feature, be sure to
replace the guard or safety feature
before resuming operation of the tool.
6. Use right tool.
Don't force small tool or attachment to
do the job of a heavy-duty tool.
Don't use tool for purpose not intended
—for example— don't use circular saw
for cutting tree limbs or logs.
7. NEVER use a power tool for applications
other than those specified.
NEVER use a power tool for applications
other than those specified in the
Instruction Manual.
8. Handle tool correctly.
Operate the tool according to the
instructions provided herein. Do not
drop or throw the tool. NEVER allow the
tool to
children,individuals unfamiliar with its
operation or unauthorized personnel.
6
be operated
9. Keep all screws, bolts and covers tightly
in place.
Keep all screws, bolts, and plates tightly
mounted. Check their condition periodically.
10. Do not use power tools if the plastic
housing or handle is cracked.
Cracks in the tool's housing or handle
can lead to electric shock. Such tools
should not be used until repaired.
11. Blades and accessories must be
securely mounted to the tool.
Prevent potential injuries to yourself or
others. Blades, cutting implements and
accessories which have been mounted
to the tool should be secure and tight.
12. Keep motor air vent clean.
The tool's motor air vent must be kept
clean so that air can freely flow at all
times. Check for dust build-up frequently.
13. Operate power tools at the rated
voltage.
Operate the power tool at voltages
specified on its nameplate.
If using the power tool at a higher
voltage than the rated voltage, it will
result in abnormally fast motor
revolution and may damage the unit and
the motor may burn out.
14. NEVER use a tool which is defective or
operating abnormally.
If the tool appears to be operating
unusually, making strange noises, or
otherwise appears defective, stop using
it immediately and arrange for repairs
by a Hitachi authorized service center.
15. NEVER leave tool running unattended.
Turn power off.
Don't leave tool until it comes to a
complete stop.
16. Carefully handle power tools.
Should a power tool be dropped or
struck
inadvertently, it may be deformed,
cracked, or damaged.
17. Do not wipe plastic parts with solvent.
Solvents such as gasoline, thinner
benzine, carbon tetrachloride, and
alcohol may damage and crack plastic
parts. Do not wipe them with such
solvents.
by
Wipe plastic parts with a soft cloth lightly
dampened with soapy water and dry
thoroughly.
against hard materials