Advertisement
1. Lens
2. Microphone
(Not
currently
supported)
3. Power LED
4. Passive
Infrared
(PIR)
Sensor
5. Privacy
Button
6. Network
LED
7. Active LED
8. White Light
LEDs
9. Echo
Eliminator
No physical adjustment is required or possible for
the lens, but you should ensure that the lens cover
remains clean. The image quality is degraded if the
lens cover is dirty or smudged.
The Pan and Tilt Camera comes with a built-in
microphone.
On - Powered on
Off - No power
Blinking - The Power LED blinks during start up.
This can take up to 20 seconds
The PIR sensor is designed for human body
detection.
When the privacy feature is enabled, live video
cannot be accessed.
On (Green) - The privacy feature is activated
Off - The privacy feature is not in use
The Network LED displays the current status of the
Pan and Tilt Camera's connection to the Network
via either the Wired or Wireless interface.
On (Green) – Pan and Tilt camera is connected to
Network
Off - Pan and Tilt Camera is not connected to the
Network
Blinking (Green) - Data is being transmitted
On (Amber) - If the LED is on for 5 seconds, the
WPS is not processing successfully
Blinking (Amber) - WPS function is being
processed successfully
Off - No user is viewing the camera
Blinking - User(s) is viewing the camera
The White Light LEDs are designed for the supply
of backlight under low-light environment.
Echo Eliminator can reduce background noise to
provide better voice quality.
4
Advertisement
