Summary of Contents for Verizon RC8061
-
Page 1: Installation Guide
RC8061 Pan and Tilt Camera Installation Guide P/N: 956YM801GJ Document Version: 1.07 Copyright 2011 All Rights Reserved. All trademarks and trade names are the properties of their respective owners. - Page 2 Package Contents The following items should be included: If any of these items are damaged or missing, please contact your service provider immediately. 1. Pan and Tilt Camera 2. 6 feet long Power adapter 3. Mounting Bracket 4. Three (3) Mounting Screws 5.
- Page 3 Chapter 1 Introduction This Chapter provides details of the Pan and Tilt Camera's features, components and capabilities. Overview The Pan and Tilt Camera has an Integrated Microcomputer and a high quality Image Sensor, enabling it to display high quality live streaming video.
- Page 4 Wireless Features Standards Compliant: The Pan and Tilt Camera complies with the IEEE802.11g (DSSS) specifications for Wireless LANs. Supports both 802.11b and 802.11g Standards: The Pan and Tilt Camera supports both 802.11b and 802.11g standards. Speeds up to 54Mbps: All speeds up to the 802.11g maximum of 54Mbps are supported.
-
Page 5: Basic Setup
This Chapter provides details on how to install and configure the Pan and Tilt Camera. You can also refer to details about assembly of this device in the online setup wizard at http://monitoringcontrol.verizon.com System Requirements To use the Wired Interface, a standard router and network cable are required. - Page 6 1. Lens No physical adjustment is required or possible for the lens, but you should ensure that the lens cover remains clean. The image quality is degraded if the lens cover is dirty or smudged. 2. Microphone The Pan and Tilt Camera comes with a built-in (Not microphone.
- Page 7 Rear Panel - Pan and Tilt Camera Figure 2: Rear Panel – Pan and Tilt Camera 1. Antenna The antenna is adjustable; best results are usually obtained with the antenna positioned vertically. 2. Speaker An external speaker can be plugged in here. Out (Not currently supported)
- Page 8 Once complete, you have the option to utilize your camera in a wired or wireless fashion. Go to http://monitoringcontrol.verizon.com and follow the steps provided in the online Setup Wizard. This will enable you to setup and connect your camera to the Home Control Network.
- Page 9 Put the antenna in the upright position to improve wireless reception Step 2: Visit the Online Portal a. Visit http://monitoringcontrol.verizon.com and follow the simple steps provided in the online Setup Wizard. This will enable you to setup and connect your camera to the Home Control network...
- Page 10 b. Push the mounting anchors into the drilled holes c. Screw the three mounting screws through the mounting bracket into the mounting anchors. Step 2: Mount the Camera Slide the Pan and Tilt Camera into the bracket and secure it firmly.
-
Page 11: Specifications
Appendix A Specifications Pan and Tilt Camera Model Pan and Tilt Camera Dimensions 90mm (W) * 35mm (H) * 90mm (D) Built-in Speaker 8 ohm, 0.5W (Not Currently Supported) - Page 12 Built-in Microphone 6mm, -40 dB+3db, >55dB (Not Currently Supported) Light Sensor Min low lux trigger value: 0.5 lux PIR Sensor Sensitivity distance: 5 meters Angle degree: 100°(cone) Focus distance: 6~9 meters Pan & Tilt Pan (320° / 4 seconds): left 160°, right 160° ...
- Page 13 Regulatory Approvals CE Approvals The Pan and Tilt Camera and the Ethernet Pan and Tilt Camera meet the guidelines of the European Union and comply with the 99/5/EEC and RTTE 99/5EG directives, including the following standards: EN60950 EN300 328-2 ...