Advertisement
54
The detector's preset discrimination patterns
can be edited to create custom patterns.
Method 1 - to reject a specifi c target
ID using an actual target
In detection, a discrimination segment
will fl ash, indicating its position on the
discrimination scale and the target's ID
number will appear on the LCD.
Press
to reject that target ID.
ACCEPT REJECT
The discrimination segment and
icon
X
will appear and the target ID number will
disappear to indicate the rejected ID.
Check that the target ID has been rejected
by detecting again. There should be no audio
response from that target ID.
1
2
1
2
3
4
5
AL
Method 2 - to reject a specifi c target ID
+ –
using
+
-
In detection, use
and
to scroll through
and select the ID you want to modify. The
fl ashing segment and the target ID numbers
will indicate the selected ID.
Press
to either accept or reject
ACCEPT REJECT
that ID. The discriminated segment and the
icon will appear (become shaded) if rejected.
The segment and the
icon will disappear
X
if accepted.
toggles between
ACCEPT REJECT
accepting and rejecting targets.
The all metal pattern cannot be edited.
1
2
X
1
2
3
1
2
3
4
5
AL
55
Advertisement
