Page 1
STEAM IRON MODEL: ESI-A2227C(LB) Owner’s Manual Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the set and quote this information to your dealer when you require service.
IMPORTANT SAFEGUARDS When using this appliance, basic precautions should always be followed, including the following: 1. Read all instructions before using. 2. Never leave the iron unattended when it is connected to the power. 3. Do not operate the iron with a damaged cord or if the iron has been dropped or damaged.
PREPARATIONS Soft the laundry to be ironed according to the international symbols on the garment label, or if this is missing, please refer to the type of fabric. GARMENT FABRIC THERMOSTAT LABEL TYPE REGULATION · synthetic min./low temperature ·· silk - wool medium temperature ···...
SELECT THE STEAM The quantity of steam is regulated by the steam dial (3). Turn the steam dial to a position between minimum and maximum depending on the quantity of steam required and the temperature selected [Fig. 5]. Warning: the iron gives off steam continuously only if you hold the iron horizontally.
AUTO SHUT OFF FUNCTION If the iron is left unattended for more than 30 seconds, the heating element will be off automatically. To determine whether the iron has shut off, the indicator light (9) (in green color) will start blinking and six-sound signal will be heard (In a horizontal position, this will happen after 30 seconds.
STORING THE IRON Disconnect the plug of the iron from the socket. Empty the water tank by turning the iron upside down and gently shaking it. Leave the iron to cool down completely. Roll up the power cord [Fig. 8]. ...