Connecting The Fwt To A Pc; Placing The Fwt - Huawei ETS2258 User Manual

2. If the signal strength icon does not appear after five minutes or you hear the failure
tone when you lift the handset, it indicates that no signal is received. In this case, you
need to adjust the direction of the antenna until you can hear the dialing tone on lifting
the handset.
3. If there is no signals even after you adjust the antenna in 360 degrees angle, it indicates
that the signal is weak in the particular site. Either change the site or consult your
service provider.

Connecting the FWT to a PC

The FWT can be connected to a PC to provide data services. Data services include Internet
surfing and faxing. To use data services, you need to purchase the data service suite and
connect the FWT to a PC as show in the following figure
Connect the USB end of the serial cable to PC and the other end to the serial port of the
FWT. Fasten the captive screw to ensure reliable connection.
Caution:
To avoid damaging the device when making connection, power off the FWT and
use the USB serial cable provided by the manufacturer.

Placing the FWT

You can place the FWT horizontally or vertically.
Horizontally
Place the FWT on a flat surface. Select a cool and ventilated site for the FWT to dissipate
the heat.
16