Grounding And Ac Power Cord Connections; Assembly Instructions - DieHard Portable Power 1150 Operator's Manual

4.

gROUNDINg AND AC POWER CORD CONNECTIONS

4.1
The jump starter charger is for use on a nominal 120-volt circuit. The plug must
be plugged into an outlet that is properly installed and grounded in accordance
with all local codes and ordinances. The plug pins must fit the receptacle
(outlet). Do not use with an ungrounded system.
4.2
the outlet, have a proper grounded outlet installed by a qualified electrician. An
improper connection can result in a risk of an electric shock or electrocution.
NOTE: Pursuant to Canadian Regulations, use of an adapter plug is not
allowed in Canada. Use of an adapter plug in the United States is not
recommended and should not be used.
5.

ASSEMBLY INSTRUCTIONS

Remove all cord wraps and uncoil the cables prior to using the jump starter.
RISK Of ELECTRIC SHOCK OR fIRE.
Never alter the AC cord or plug provided – if it does not fit
5
• •