BMW 3 series Owner's Manual page 211

Communications
Possible commands are read aloud.
Digits from zero to nine are recognized.
Each digit can be spoken individually or com-
bined into a sequence to accelerate the entry
process.
Using alternative commands
There are often a number of commands to run a
function, e.g.:
{Dial name} or {Name}.
Example: dialing phone numbers
1. Press the button on the steering wheel.
2. {Dial number}
The system replies: {{Please say the num-
ber}}.
3. For example: {123 456 7890}
The system replies: {{123 456 7890. Con-
tinue?}}
{Dial}
4.
The system replies: {{Dialing number}}
Calling
Dialing phone numbers
1. {Dial number}.
2. Say the phone number.
3. {Dial}.
The connection to the desired subscriber is
established.
Correcting phone number
Digit sequences can be deleted after the sys-
tem has repeated the digits.
{Correct number}.
The command can be repeated as often as nec-
essary.
Deleting phone number
{Delete}.
All digits entered up to this point are deleted.
210
Telephone
Online Edition for Part no. 01 40 2 902 533 - © 03/12 BMW AG
Redialing
{Redial}.
Voice phone book
Depending on how your vehicle is equipped, it
may be necessary to create your own voice
phone book.
The entries must be entered using voice com-
mands and are separate from the memory in the
mobile phone. Up to 50 entries can be set up.
Storing the entry
1. {Save name}.
2. Say the name aloud. Do not exceed a
speaking duration of about 2 seconds.
3. Say the phone number after being
prompted to do so by the system.
4. {Save}.
Deleting the entry
1. {Delete name}.
2. Say the name when prompted.
3. Confirm request: {Yes}
Deleting all entries
{Delete phonebook}.
1.
The dialog for deleting phone book is
opened.
2. Confirm request: {Yes}
3. Confirm request again: {Yes}
Reading and selecting the entries
1. {Read phonebook}.
The dialog for reading phone book is
opened.
2. Say {Dial number} when the desired
entry is read.
Selecting an entry
{Dial name}.
1.
2. Say the name when prompted.
3. Confirm request: {Yes}