CITROEN C4 Owner's Handbook Manual page 203

Fitting a wheel
Fitting a steel or "space-
saver" spare wheel
If your vehicle is fi tted with al-
loy wheels, when tightening the
bolts on fi tting it is normal to
notice that the washers do not
come into contact with the steel
or "space-saver" spare wheel.
The wheel is secured by the
conical contact of each bolt.
After changing a wheel
To store the punctured wheel in the boot
correctly, fi rst remove the central cover.
When using the "space-saver" type
spare wheel, do not exceed 50 mph
(80 km/h).
Have the tightening of the bolts and
the pressure of the spare wheel
checked by a CITROËN dealer or a
qualifi ed workshop without delay.
Have the punctured wheel repaired
and replace it on the vehicle as soon
as possible.
P R A C T I C A L I N F O R M A T I O N
List of operations
 Put the wheel in place on the hub.
 Screw in the bolts by hand to the
stop.
 Pre-tighten the security bolt using
the wheelbrace 1 fi tted with the se-
curity socket 4 .
 Pre-tighten the other bolts using the
wheelbrace 1 only.
 Lower the vehicle fully.
 Fold the jack 2 and detach it.
 Tighten the security bolt using the
wheelbrace 1 fi tted with the security
socket 4 .
 Tighten the other bolts using the
wheelbrace 1 only.
 Refi t the chromed bolt covers on
each of the bolts (according to
equipment).
 Store the tools in the box.
11
201