Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ikelite iTTL
Summary of Contents for Ikelite iTTL
- Page 1 I n s t r u c t i o n M a n u a l Knurled Ring Ikelite Bulkhead White Dot Nikonos Connector O-ring Waterproof Cap Thank you for your purchase of Ikelite equipment. Please read this instruction manual completely before attempting to operate or dive with this product.
-
Page 2: General Information
General Information The Ikelite iTTL Adapter is for use with Non-Ikelite housings with a TTL hotshoe & Nikonos-style bulkhead. The hotshoe must have all 5 wires connected. Refer to housing specifications or contact housing manufacturer for connector style and wiring information. - Page 3 Connecting Adapter to Housing Bulkhead (continued) Diagram 1 Nikonos Connector Knurled Ring Adapter Knurled Ring Ikelite Sync Cord Knurled Ring...
-
Page 4: Strobe Compatibility
Connecting DS Substrobes Use ONLY with Ikelite DS Substrobes. If using an older DS50 or DS125 strobe, see strobe compatibility below. Make sure all components are dry. Remove the waterproof cap from the Ikelite bulkhead on the black delrin pod. Lightly lubricate bulkhead threads. - Page 5 The knurled ring can be rotated clockwise or counter-clockwise to align the knurled ring’s white dot with the white dot on the label next to TTL or Manual. The DS Substrobe must be set to TTL mode for the iTTL adapter to provide TTL operation. Housing Bulkhead Compatibility Over the years various housing manufacturers have introduced a variety of "Nikonos-style"...
- Page 6 Troubleshooting/Inserting Pins If intermittent or loss of TTL operation occurs, insert the 2 gold plated pins into the Nikonos Connector End corresponding receptacles as shown below. With the Index Recess at the bottom, the pins should be at the 10 and 2 o’clock positions. Once the pins are installed they cannot be removed.
-
Page 7: Limited Warranty
This Ikelite product is warranted against any manufacturing defects for a period of one (1) year from the original date of purchase. Defective products should be returned to Ikelite postage paid. Ikelite will, at its sole discretion, repair or replace such products, and will return to customer postage paid. -
Page 8: Technical Support
Technical Support Ikelite Technical Support Email: ikelite@ikelite.com Phone 317-923-4523 Fax 317-924-7988 Ikelite Underwater Systems 50 West 33rd Street Indianapolis, IN 46208 USA www.ikelite.com 4302_iTTL_Adapter_03-1212...