Advertisement
5. Disconnecting from computer
Disconnecting from computer
To disconnect pen, please click "SAFELY REMOVE
HY-6200
HARDWARE" on the right bottom corner for the task
bar. Then "USB mass storage device" to disconnect
pen.
6. Charging
Charging
Connect to computer USB interface or charger.
During charging, the red light flashes. When the
battery is fully recharged, the red light stops
flashing. Charging may take up to 4 hours.
7. Setting time
Setting time
Install micro SD card into device,
1. Turn off the camera.
2. Connect to computer.
3. Open the removable disk.
4. Select time documents and open.
To set time display:
The y and N at the end will determine if the display
will show time.
"2013.01.01 12.01.01 Y" will display time.
"2013.01.01 12.01.01 N" will not display time.
The above time string shows the time you want to
set. Pay attention to the space between
Year/Month/Day and Hours Minutes and Seconds.
4
Advertisement
