Page 1
Flat Panel Universal Remote Control Indoor Antenna CONTROL UP TO 10 A/V DEVICES Model Number: UR39677 Model Number: FDA38558 INSTRUCTIONAL MANUAL INSTRUCTION MANUAL After Sales Support After Sales Support Telephone: 1300 663 907 Telephone: 1300 663 907 Internet: www.winplus.com.au Internet:...
Page 2
Flat Panel Indoor Antenna Flat Panel Indoor Antenna Universal Remote Control - 10 in 1 Universal Remote Control - 10 in 1 Warranty Details The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months (dependant on product) from the date of purchase.
Powering All Devices On/Off Welcome Congratulations on choosing to buy a BAUHN® product. By You can power on or off all devices simultaneously. Proceed doing so you now have the assurance and peace of mind that as follows: comes with purchasing a product made by one of the leading 1.
General Safety Instructions Read this manual thoroughly before first use and keep it in a safe 8. Press the OK button (22). The result will be displayed. place for future reference, along with the warranty card, purchase 9. Quit the process by pressing any source device receipt and carton.
Setting the Time Product Use The time is shown on the remote control display. You can set This product is designed to control up to 10 AV devices using it as follows: one remote control. The remote control can replace your old remote controls, using the learning function to mimic 1.
Getting Started Erasing Favourites In this manual, the remote control keys are represented in capital letters, followed by a number in brackets that 1. Press and hold the SET button (21) for at least 3 seconds. represents the key number. Key numbers are shown in The display shows [CODE SETUP].
Favourites 1. On/Standby button 2. Source device selection buttons (TV, STB, CBL, AUDIO, This function lets you program up to 15 channels from any PC, VCR, DVD, CD, DVR, AUX) * channel presets of your receivers (TV or STB) and easily 3.
Programming VPT Manually While sending a command by pressing a button, the display and buttons backlight illumination will turn off. As soon as If you want to control the volume of a specific device you release the button the backlight illumination will turn on individually (not using VPT), this must be programmed again.
TV set or Hifi equipment regardless of the sound source that you have To program this remote to function with your Bauhn, selected. Therefore, you will not have to press the TV or...
Special Features 6. Now enter the first letter of the desired manufacturer Controlling a PC by using the numeric keypad. The letter assignment To be able to control a computer, your computer must feature is equivalent to the keypad on a mobile phone. a compatible infrared receiver.
Executing a Macro Entering Device Codes Directly 1. Press the MACRO button (28). No message will be Switch on the device for which you want to program the displayed. remote control. If your device is a VCR or a CD or DVD player, please insert a tape or CD/DVD.
Macros 10. Press the OK button (22) to confirm the entered device Macros allow you to execute up to 16 button commands code. The message [SUCCESS] will appear for a few in sequence by just pressing one single button. The used seconds and the device returns to the previous menu buttons may correspond to multiple devices.
Page 13
5. Press (8) twice. The display shows [DELETE DEV]. 9. As soon as the TV set powers off, press the PAUSE button (12). This will interrupt the automatic search. 6. Press the OK button (22). The display shows [SELECT DEV]. 7.
Learning Function 10. If you see the message [FAIL], the command could not be For the learning function you must have the programmed. Repeat these steps with the same button, original remote control unit of the device you want but keep it pressed longer. to program, and this remote control unit must be 11.