Zoom Mic; Mic Level - Panasonic HDC-SD80 Operating Instructions Manual

[WIND NOISE CANCELER]
This will reduce the wind noise coming into the built-in microphones while maintaining the realism.
≥ Switch to Manual Mode. (l 64)
: [RECORD SETUP] # [WIND NOISE CANCELER] # [ON]
MENU
≥ This function's default setting is [ON].
≥ When switching to Intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and the
setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.

[ZOOM MIC]

Directivity of the microphone is synchronized with the zoom operation. Sounds near the front
of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are
recorded more realistically if you zoom out (wide angle).
≥ Switch to Manual Mode. (l 64)
: [RECORD SETUP] # [ZOOM MIC] # [ON]
MENU

[MIC LEVEL]

When recording, the input level from the built-in microphones can be adjusted.
≥ Switch to Manual Mode. (l 64)
1 Select the menu.
: [RECORD SETUP] # [MIC LEVEL] # desired setting
MENU
[AUTO]:
[SETr ]/[SET]:
2
(When [SETr
Touch /
≥ Touch to activate/disactivate AGC.
When AGC is activated, the icon is surrounded by
yellow and the amount of sound distortion can be
reduced. When AGC is disactivated, natural recording
can be performed.
≥ Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the
sound is distorted.) Select a lower setting for
microphone input level.
3 Touch [ENTER] to set the microphone input level and then touch [EXIT].
(Microphone input level meter) appears on the screen.
≥
AGC is activated, and the recording level is adjusted
automatically.
The desired recording level can be set.
]/[SET] is selected)
to adjust.
A Left
B Right
C Microphone input level
59
VQT3J17