Sony DAV-HDX285 Operating Instructions Manual page 60

60 GB
• [OSD] (On-Screen Display)
You can switch the display language on the TV
screen.
• [MENU] (DVD VIDEO only)
You can switch the language for the disc's
menu.
• [AUDIO] (DVD VIDEO only)
You can switch the language of the sound track.
When you select [ORIGINAL], the language
given priority on the disc is selected.
• [SUBTITLE] (DVD VIDEO only)
You can switch the language of the subtitles
recorded on the DVD VIDEO.
When you select [AUDIO FOLLOW], the
language for the subtitles changes according to
the language you selected for the sound track.
m:mI
• When you select a language in [MENU], [AUDIO],
or [SUBTITLE] that is not recorded on the DVD
VIDEO, one of the recorded languages will be
automatically selected (depending on the disc, the
language may not be selected automatically).
iMI
• If you select [OTHERS - ] in [MENU], [AUDIO],
and [SUBTITLE], select and enter a language code
from "Language Code List" (page 106) using the
number buttons.
,
SettingsfCJrt~e
display
[VIDEO SETUP]
Select settings according to the TV to be
connected.
VIDEO SETUP
TV TYPE: 16:9
PROGRESSIVE (CQMPONENTOUiy. "" . OfF
4:30ufPUT: " ,
"'FULL,
BlACK
LEVEL: -
ON:
Bl,ACK-LEVEL
(COMflONENTOUTj:'
OFF
PAUSE MODE: "AUTO
• [TV TYPE]
You can select the aspect ratio of the connected
TV.
[16:9]: Select this when you connect a wide-
screen TV or a TV with a wide mode function.
[4:3 LETTER BOX]: Select this when you
connect a 4:3 standard TV. The system displays
a wide picture with bands on the upper and
lower portions of the TV screen.
[4:3 PAN SCAN]: Select this when you connect
a 4:3 standard TV. The system automatically
displays a wide picture on the entire screen and
cuts off the portions that do not fit.
m:mI
• Depending on the DVD, [4:3 LETTER BOX] may be
selected automatically instead of [4:3 PAN SCAN] or
vIce versa.
• [PROGRESSIVE (COMPONENT OUT))
You can set the progressive signal that is output
from the COMPONENT VIDEO OUT jacks to
on/off. For details, see "Does your TV accept
progressive signals?" (page 35).
[OFF]: The system outputs interlace signals.
[ON]: The system outputs progressive signals.
When you select [ON], follow the Steps below.
1
Select [ON], then press
G.
The confirmation display appears.
2
Press
+-1-+
to select [START], then
press
G.