Step 3: Performing The Quick Setup - Sony DAV-HDX285 Operating Instructions Manual

16:9
16:9
4:3 LEnER BOX
4:3 PAN SCAN
STANDARD
The Setup Display for selecting the speaker
formation appears.
.33
GB
SPEAKER FORMATION
The Setup Display for the Control for
HDMI function appears.
5
Press
"'/oJ,
to select a language, then
press
G.
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
6
Press "'/oJ, to select the setting that
matches your TV type, then press
G .
• [16:9]: For a wide-screen TV or a 4:3
standard TV with a wide-screen mode
(page 60)
• [4:3 LETTER BOX] or [4:3 PAN SCAN]:
For a 4:3 standard TV (page 60)
7
Press "'/oJ, to select the setting, then
press
G.
• [ON]: The Control for HDMI function
(page 70) is set to on.
• [OFF]: The Control for HDMI function is
set to off.
ENGLISH
ENGLISH
FRENCH
SPANISH
PORTUGUESe
f8-+--- 1/(9
o
' - - - ' ! - -
DISPLAY
Step 3: Performing the
Quick Setup
Follow the Steps below to make the basic
adjustments for using the system.
Displayed items vary depending on the area.
-
• Make sure that the function is set to "DVD"
(page 36).
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press
[ENTER]
to run QUICK SETUP.]
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 34).
4
Press
G
without inserting a disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
1
Turn on the TV.
2
Press
IIC,).