Preparation; Attaching The Base; Preparing Your Lcd Tv For Wall Mounting - Acer AT1916D User Manual

PREPARATION

IMPORTANT: Do not apply pressure to the
screen display area which may compromise
the integrity of the display. The manufacturer's
warranty does not cover user abuse or
improper installations.

ATTACHING THE BASE

IMPORTANT: The Base of the TV must be
assembled prior to usage.
1. Place TV unit face down on a soft and
flat surface (blanket, foam, cloth, etc.) to
prevent any damage to the TV.
2. Carefully align and insert the Base to
the stand.
3. Gently push the Base towards the TV
until the locking mechanism locks into
place.
PREPARING YOUR LCD TV FOR
WALL MOUNTING
We suggest that you keep your TV at least 2.36
inches (60 mm) from the wall to prevent cable
interference.
Before mounting your TV on the wall, you need
to remove the base.
For your safety, please use listed wall mount
bracket with minimum weight of the TV
without stand. (Please see page.26)
To attach a wall mount bracket to your TV:
1 Loosen the screws holding your TV to
the stand and remove the stand base
from the TV.
2 Secure the wall mount bracket to the
back of your TV using four screws, as
indicated in the illustration.
100 mm
M4 screws
NOTE
 Wall mount bracket & screws are not
included.
Please make sure to connect the power plug
to the wall outlet socket after connecting the
TV to the power cord!
1. Install the base stand; place the TV
on a solid surface.
Ensure that the TV is placed in a position
to allow free flow of air. Do not cover the
ventilation openings on the back cover.
To prevent unsafe situations, no naked
flame sources, such as lighted candles,
should be placed on or in the vicinity.
Avoid heat, direct sunlight and exposure
to rain or water. The equipment shall not
be exposed to drips or splashes.
6
M4 screws
Min
1 m