Information - Acer AT1916D User Manual

INFORMATION

Connecting to Power
Check that the voltage marked on the product corresponds with your supply voltage.
This product is fitted with a 16A plug (or 10 A plug). If this plug is unsuitable or needs
to be replaced, please note the following :
Plug Replacement
If you need to replace the fitted plug.
WARNING :
Never connect live or neutral wires to the earth terminal of the plug.
Only fit an approved 16A plug. If in doubt, consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured as follows:
Blue-Neutral
Brown-Live
As the colors of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured blue must be connected
to the terminal which is marked with N or coloured blue. The wire which is
coloured brown must be connected to the terminal which is marked L or
coloured brown. Always ensure that the plug cord grip is fastened correctly.
CE marking
The shipped version of this device complies with the requirements of
EEC directives 2004/108/EC "Electromagnetic compatibility" and
2006/95/EC "Low voltage directive"
WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF
WITH HOUSEHOLD WASTE. PLEASE RECYCLE WHERE FACILITIES
EXIST. CHECK WITH YOUR LOCAL AUTHORITY FOR RECYCLING
ADVICE.
32