B. REMOVING THE OUT CASE(Figure 8)
(1) Remove the vent grille by removing two screws
securing it to the out case.
(2) Remove two screws securing it to the air duct.
(3) Remove the mounting plate by turning the
screws (1 or 2 screws) securing it to the outer
case.
(4) Remove two screws on the left central edge and
one screw on the right central edge of the base
plate.
Remove the fan bracket from the out case by
removing one screw securing it to the outer
case.
(5) Remove six screws of the rear cavity.
(6) Remove the outcase.
Figure 8
-36-
Fan Bracket
Power Cord