Guide To Parts And Controls - Sony SVR-HDT1000 Operating Instructions Manual

Guide to Parts and Controls

For more information, see the pages in parentheses.
Front panel
A [/1 (on/standby)
Turns the recorder on or off.
B REC1/REC2 indicators
C Power indicator
Lights up in white when the recorder is
turned on.
D
USB jack (25, 26, 30)
Connect a USB device to this jack.
Rear panel
A AERIAL IN/OUT jacks (10)
B VIDEO OUT jack (12)
C AUDIO OUT L/R jacks (12)
D HDMI OUT jack (11)
E RESET
When the recorder does not operate
properly, press and hold the RESET
button for more than 3 seconds.
When picture noise appears after you
change the "HDMI Resolution" setting,
briefly press the RESET button
(page 33).
F
(remote sensor)
E Maintenance and Service
terminal
Used for maintenance and service.
F DC IN jack (13)
G
USB jack (25, 26, 30)
Connect a USB device to this jack.
H DIGITAL OUT (COAXIAL) jack
(12)
7
,continued