Table of Contents
Advertisement
Web Interface
Overview
The RS2 must be attached to a host unit via RJ-12 patch cable in order to view the RS2 on a
network. The host unit is accessible via a standard, unencrypted HTTP connection as well as an
encrypted HTTPS (SSL) connection. The following web pages change or contain added content
after the RS2 Series unit is connected:
Sensors Page
The front page, Sensors, gives both instantaneous and historical views of the host unit's data.
Real time readings are provided for all power strip and sensor data next to historical graphs.
Each attached RS2 Series units will show a remote sensor section on the host unit's Sensors
page. All power monitoring information will be shown here.
Figure 3: Sensors Page - Remote Sensor
GM1104
7
Revision Date: 8/24/2011
Advertisement
Table of Contents
