Specifications; Overview; Environmental; Electrical - Geist RS2 Series Instruction Manual

Satellite switched power monitoring unit
Table of Contents

Advertisement

Specifications

Overview

The RS2 Series expands the power of your Geist R-Series RSMINI, RSE, RSO, RCX, RSM, RCM,
or RCU units (firmware version 3.00 and higher ONLY) with the addition of 2 outlets with
remote switching and monitoring. RS2 Series units use the host unit's built in web server to
display power monitoring data and give users control for installations needing switching of
either one or two outlets. No software other than a web browser is required for operation and
several data formats are available.
Apparent Power, and also provide a calculated Power Factor. The measurements are per unit,
so both outlets are measured as one circuit.
multiple units within a cabinet or row by tethering units. Optional external sensors can monitor
other environment factors.
Note: On boot-up the RS2 will only turn on Outlet 1. After the RS2 has completed boot-up
(about 5 seconds) Outlet 2 will turn on. This is to prevent a large inrush current if the RS2 is
supplying power to certain devices.

Environmental

Temperature
Operating:
Storage:
Humidity
Operating:
Storage:
Elevation
Operating:
Storage:

Electrical

See nameplate for unit ratings.

Receptacle Ratings

NEMA 5-15R
IEC-320 C13
IEC-320 C19

EMC Verification

This Class A device complies with part 15 of the FCC Rules.
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired
operation.
1
Given ratings are per receptacle bank
GM1104
10°C (50°F) min
-25°C (-13°F) min
5% min
95% max
5% min
95% max
0 m (0 ft) min
0 m (0 ft) min
125 Volts, 15 Amp
125/250 Volt, 15 Amp (North America) or 10 Amp (Global)
125/250 Volt, 20 Amp (North America) or 16 Amp (Global)
RS2 Series units monitor Voltage, Current, Real and
A single, Ethernet equipped host can connect
45°C (104°F) max
65°C (149°F) max
(non-condensing)
(non-condensing)
2000 m (6561 ft) max
15240 m (50000 ft) max
3
1
Operation is subject to the
Revision Date: 8/24/2011

Advertisement

Table of Contents
loading

Table of Contents