Pioneer DEH-P7950UB Installation Manual page 5

20 cm
1.5 m
1. USB cable
Connect the USB portable audio
player or USB memory (sold
separately).
5. Front output
2. Antenna jack
3. Subwoofer output
4. AUX jack (3.5 ø)
8. IP-BUS input (Blue)
Use a stereo mini plug cable
to connect with auxiliary
equipment.
9. IP-BUS cable
13. Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio
Mute lead on that equipment. If not, keep the Audio Mute lead free of 20. Blue/white
any connections. Connect to system control terminal of the power
14. Fuse (10 A)
amp or auto-antenna relay control terminal
(max. 300 mA 12 V DC).
15. Yellow
Connect to the constant 12 V supply terminal.
19. Fuse resistor
16. Red
Connect to terminal controlled by ignition switch (12 V DC).
19. Fuse resistor
17. Orange/white
Connect to lighting switch terminal.
18. Black (chassis ground)
Connect to a clean, paint-free metal location.
35. With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
36. Perform these connections when
using the optional amplifier.
16 cm
7. Rear output
6. This product
12. Power amp
11. Connect with RCA cables
(sold separately)
10. Multi-CD player
(sold separately)
21. System remote control
+ +
22. Front speaker 22. Front speaker
≠ ≠
25. White 27. Gray
+ +
22. Front speaker 22. Front speaker
≠ ≠
26. White/black 28. Gray/black
23. Left
29. Green 31. Violet
+ +
33. Rear speaker 33. Rear speaker
≠ ≠
30. Green/black 32. Violet/black
+ +
33. Rear speaker 33. Rear speaker
≠ ≠
+ +
34. Subwoofer 34. Subwoofer
≠ ≠
12. Power amp
(sold separately)
12. Power amp
(sold separately)
(sold separately)
13. Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio
Mute lead on that equipment. If not, keep the Audio Mute lead free of
any connections.
15. Yellow
Connect to the constant 12 V supply terminal.
16. Red
Connect to terminal controlled by ignition switch (12 V DC).
17. Orange/white
Connect to lighting switch terminal.
24. Right
18. Black (chassis ground)
Connect to a clean, paint-free metal location.
41. Note:
Change the initial setting of this unit (refer to the Operation
Manual). The subwoofer output of this unit is monaural.
Fig. 1
± qJAë
1.5 m
20 cm
1. USB cable
Connect the USB portable audio
player or USB memory (sold
16 cm
separately).
5. Front output
3. Subwoofer output
2. Antenna jack 6. This product
3. Subwoofer output
4. AUX jack (3.5 ø)
Use a stereo mini plug cable 8. IP-BUS input (Blue)
to connect with auxiliary
equipment.
10. Multi-CD player
9. IP-BUS cable (sold separately)
20. Blue/white
Connect to system control terminal of the power
14. Fuse (10 A) amp or auto-antenna relay control terminal
(max. 300 mA 12 V DC).
19. Fuse resistor
+
22. Front speaker
≠
23. Left
19. Fuse resistor
+
37. Subwoofer (4 Ω)
≠
38. When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
39. Not used.
25. White 27. Gray
+
22. Front speaker
≠
26. White/black 28. Gray/black
24. Right
29. Green 31. Violet
+
37. Subwoofer (4 Ω)
≠
30. Green/black 32. Violet/black
+
29. Green 31. Violet
40. Subwoofer
(4 Ω) × 2
30. Green/black 32. Violet/black ≠
Fig. 2
≤ qJAë