Assembly & Usage - Thane Fitness OrbiTrek PRo Owner's Manual

Owner's Manual
I. BEFORE you begin
1. Locate a comfortable work site. Assemble your OrbiTrek Pro in an open space with adequate
ventilation and lighting. Because the OrbiTrek Pro is portable, to some extent, you need not
assemble it exactly where it is to be used. For your convenience, however, you should avoid
hauling the machine across excessive distances, through narrow passage ways or over staircases
once its assembly is complete.
2. It's a good idea to flatten out the shipping carton, and use it as a work surface when you
assemble the OrbiTrek Pro. Keep a few paper towels handy since some of the components
are lightly pre-greased.
3. Find your tools. OrbiTrek Pro includes all the tools needed for assembly, however, you may find
that using the following tools will make your assembly of the OrbiTrek Pro easier and quicker.
• Scissors or utility knife.
• Ruler with both metric and English measurements.
• Standard ratchet with 14 mm, 17 mm, 18mm, and 19 mm sockets.
4. Assembly Video. The enclosed workout video includes complete assembly instructions which are
located after the workout portion of the video. Load the video into your VCR and simply assemble
your OrbiTrek Pro following the visual instructions provided. You can always refer to the written
instructions if you need to.
#41 3/8" x 60
Carriage Bolt (4X)
#14 Connection Shaft (1X)
#29 M8 Lock Nut (2X)
#30 M8x50 Bolt (2X)
#36 M8 Lock Nut (4X)
#35 1/2" Pedal Hinge Bolt (2X) (L, R)
ASSEMBLY & USAGE
#43 3/8" Acorn Nut (4X)
#26 D Clip
Washer (2X)
#67 1/2" Spring
Washer (2X)
Wrench 1 (1X)
#65 M10
#42 3/8" Arc
Lock Nut (2X)
Washer (4X)
#27 3/8" Spring
Washer (2X)
#34 M8x50 Hex
#33 Big Washer (8X)
Head Bolt (4X)
#66 1/2" Lock Nut (2X) (L, R)
3
#64 3/8" M10
Washer (2X)
#28 3/8" x 20
Screw (2X)
Allen Wrench 6# (2X)
#25 M x38
Knob Bolt (2x)
Allen Wrench
8# (1X)
Wrench 2 (1X)