Advertisement
Troubleshooting:
Problem
No picture
No sound
No response while using the
remote control
Specifications:
CATV/TV Input
Video Input
Composite Video
S-Video
Audio Input (Signal Source)
Audio Input (PC)
VGA In
Power-AC/DC adaptor
VGA Output
Video Output (only Valid on TV Mode)
Audio Output
Regulatory specification:
Complies with requirements of:
Replaceable Parts
In the event of a lost or
damage part, the following
replaceable accessories are
available. Please call
877-AV-EXPERT for order
information.
1. Compare all connections to the appropriate
illustrations to verify correct connectivity.
2. Make sure the power adapter is connected to the
electrical supply and the converter.
3. Make sure that the selected mode is the same as the
input signal, and then perform Auto Scan.
1. Compare all connections to the appropriate illustrations
to verify correct connectivity.
1. Make sure that you are pointing to the IR sensor
window within 20ft. and within +/- 15 degrees of the
unit.
2. Check batteries and replace with new ones if
necessary.
75 Ohm "F" type female connector
Composite Video, S-Video
75Ohm, 1V p-p via RCA type connector
75Ohm, 1V p-p via 4-Pin mini-DIN
Stereo Audio via 2 RCA type connectors
Stereo Audio via 3.5mm stereo connector
HD-15 Female
12 V DC 500mA (UL, CE)
HD-15 Female
75Ohm, 1V p-p via RCA type connector
Stereo Audio via 3.5mm stereo connector
FCC 15.225
FCC Part 15-Class B
ICES-003
CE
Part Number: 98000- AC/DC adapter
98023- Remote control
10
Solution
Advertisement
