Advertisement
MENU
1. Input
2.Picture
3.TV
4.Resolution
5.OSD
6.Language
7. Reset
6. Language:
There are 2 adjustments available within this function. To make an adjustment, highlight the item you want to
adjust, press the "Select" key on the remote and make the adjustment.
higher.
1.
English 2.Chinese
7. Reset
Select this function to bring the Multifunction Video Converter to original factory settings.
(9) EXIT
In "MENU" functions, press this key to return to Main MENU or exit set up.
(10) Numeric Key
You can directly select the channel you want to watch. Please note these keys are only active in TV Mode.
(11) SCAN
When you set up Multifunction Video Converter for the first time, it is recommended to press this key to search for
television channels available in your area and store them into memory. There are 3 selections available:
1. Full Scan,
2. Channel Scan
3. Exit.
Full Scan: scans the available channels by frequency (recommended).
Channel Scan: scans the available channels according to the internal pre-set channel map.
Please Note: this key is valid in TV Mode only.
(12) RCL
Press to return to the previous channel. Please Note: this key is valid only in TV Mode only.
(13) FC MEMO
There are 8 resolution selections available, and this function is cyclic. 640X480 60Hz, 800X600 60Hz, 852X480
60Hz, 1024 X768 60Hz, 640X480 75Hz, 800X600 75Hz, 852X480 75Hz, 1024 X768 75Hz
(14) OSD Function
Press this key to review the input source and/or channel selected, press again to remove the display from view.
1.OSD Position
2. OSD Color
Choose OSD then
"Select", 2 items show
8
key to adjust lower,
to adjust
Advertisement
