Maintenance; Replacing The Projection Lamp - BOLEX Super 8 cartridge projector Instruction Manual

Maintenance
Replacing the projection lamp
Disconnect the projector.
Remove the side cover. If the lamp
is hot, let it cool. Release the spring (g).
Take the lamp out and remove it
from its socket.
Insert new lamp in socket.
Mount the new lamp by inserting
the lug (h) into the slot (i) on the
holder, if there is a lug on your
lamp. This automatically centers
the lamp.
Note: Never touch the bulb of the
lamp; hold it by the rim of the
mirror or the socket.
l
14