BOLEX Super 8 cartridge projector Instruction Manual page 12

Select the most satisfactory image
brightness. (The lower brightness
prolongs the life of the lamp) .
The films are projected and
rewound automatically, one after
the other, without any manual
operation. During the change from
one film to the next, the light is
automatically reduced by a shutter.
During projection, you may add
new cartridges or change the order
of the cartridges.
Do this however only at the
beginning of the projection of a
film, i.e. right after a cartridge has
changed, because the pressure
plate must not be moved while the
projector is changing cartridges.
Projected cartridges may be
removed at any time after they
have left the rewinding compart-
ment.
To stop projection for a moment,
close the cartridge compartment
door. The intermission lamp lights
up automatically.
You can reject a partially
projected film and go immediately
to the next cartridge by pressing
(1 second at least) the cartridge
changing key (+) .
(Do not get in the way of cartridges
coming out of the compartment.)
If you press this key before the
previous film has been completely
rewound (indicated by the red
warning light on the side of the
projector), the cartridge w" i ll not
change until rewinding is com-
pleted.
10