And Features - Kenmore 110.2810 Series Use & Care Manual

1
WASH CYCLE BUTTONS
Press to select the desired cycle� See "Cycle Guide" for
detailed information on each cycle�
WASH CYCLE KNOB
2
Turn the Wash Cycle knob to select a cycle for your laundry
load� See "Cycle Guide" for detailed descriptions of cycles�
3 TIME DISPLAY
The Estimated Time Remaining display shows the time
required for the cycle to complete. Factors such as load size
and water pressure may affect the time shown in the display.
Overloading, unbalanced loads, or excessive suds may cause
the washer to adjust the cycle time, as well.
4 CYCLE OPTIONS
You may add or remove options for each cycle� Note that
not all options can be used with all cycles, and some are
preset to work with certain cycles.
PREWASH
Use this option to add an extra agitation and soak time to
the beginning of any cycle to break up tough stains�
TWO RINSES
This option can be used to automatically add a second
rinse to most cycles�
STAIN BOOST
This option provides enhanced cleaning action for tough
stains. It will add additional agitation and soak time to the
cycle�
DISPENSER
Press this button to set the dispensers for Timed Oxi, Fabric
Softener, or both so that the selected laundry product is
added to the load at the correct time�
CYCLE SIGNAL
Use this option to adjust volume of the signal that sounds
at end of cycle. You may select High, Low, or Off (no
indicator lit)� The Cycle Signal is a helpful reminder to
remove items from washer as soon as the cycle has
completed�
CONTROL PANEL AND FEATURES
1
8 7
Not all features and cycles are available on all models�
2 3
6
CYCLE MODIFIERS
5
When you select a cycle, its default settings will light up.
WASH TEMP
Temperature Control senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following the
garment label instructions, use the warmest wash water
safe for your fabric�
• Warm and hot water may be cooler than what your
previous washer provided.
• Even for cold wash settings, some warm water may
be added to the washer to maintain a minimum
temperature�
SOIL LEVEL
Soil level (wash time) is preset for each wash cycle. As
you press the Soil Level pad, the cycle time (minutes) will
increase or decrease in the Estimated Time Remaining
display and a different wash time will appear.
For most loads, use the soil level that is preset with the
cycle you have chosen� For heavily soiled and sturdy
fabrics, press SOIL LEVEL to select more wash time, if
needed. For lightly soiled and delicate fabrics, press SOIL
LEVEL to select less wash time, if needed. A lower soil
level setting will help reduce tangling and wrinkling.
SPIN SPEED
This washer automatically selects the spin speed based
on the cycle selected� The preset speeds can be changed�
Not all spin speeds are available with all cycles.
• Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
• Slower spin speeds mean less wrinkling, but will leave
your load more damp�
START/PAUSE/UNLOCK LID BUTTON
6
Press to start the selected cycle� Be sure all desired
Modifiers and Options have been selected. Press START/
PAUSE/UNLOCK LID once to unlock the lid and add a
garment. Press START/PAUSE/UNLOCK LID again to
complete the cycle from where it was stopped. The lid
must be closed for the washer to start.
4
5
5