Speed Dial; Call Setup - Maxcom MM820 Plus User Manual

Speed dial

The numerical keys 0 and 2–9 can be used for speed dialing.
Adding speed dial numbers
1：Press Menu, scroll to
2：Select Speed dial and press OK.
3：Select 0 and press Add.
4：Select an entry from the phonebook and press OK.
5：Repeat to add speed dial entries for keys 2–9.
To speeddial an entry, press and hold the corresponding number key.
To edit an existing entry, select it and press Options, then select Edit or Delete and
press OK.

Call setup

1：Press Menu, scroll to
2：Select Call setup and press OK for the following settings:
Caller ID
Controls display of your phone number on the recipients phone. Select an option
and press OK.
Set by network
Hide ID
Send ID
Call waiting
Select an option and press OK. See also Operation - Call waiting
Activate
Deactivate
Query status
Call divert
Set up which calls should be diverted.
Select a condition and press OK, then select Activate，Deactivate or Query status
(see Call waiting above) for each.
Div. voice calls
Div. unreached
Div. no reply
Divert if busy
Cancel diverts
and press OK.
and press OK.
Use default setting by the network
Never show your number
Always show your number
Enables the function
Disables the function
Displays if the service is active or not
Diverts all voice calls.
Diverts incoming calls if the phone is turned off or out of
range.
Diverts incoming calls if unanswered.
Diverts incoming calls if the line is busy.
Do not divert calls