Table of Contents
Advertisement
VersaLink Wireless Gateway (Model 327W)
15.18 RIP Configuration
In the Advanced screen, click RIP Configuration. The following screen will appear.
RIP (Routing Interface Protocol) is a dynamic inter-network routing protocol primarily used in interior routing
environments. A dynamic routing protocol, as opposed to a static routing protocol, automatically discovers routes
and builds routing tables.
If you change any settings in this screen, click Save to save the settings. If you click Reset, this screen will refresh
and display the previously saved RIP settings.
RIP Global Enable
Interface Type
Receive
030-300505 Rev. A
RIP Configuration
Factory Default = Disabled
If this box is checked, RIP will be Enabled (activated).
LAN: Select this if you are configuring RIP for the LAN side.
WAN: Select this if you are configuring RIP for the WAN side. (WAN side is
receive only.)
The version of RIP to be accepted.
Possible Responses:
None
RIPv1
147
User Guide
April 2007
Advertisement
Table of Contents
