If 25-foot 7-pin DIN cable. Use only the cable and Pacific Time the provided plug does not fit into your outlet, connector specified for the product. The RC-1 Web: http://www.SymetrixAudio.com consult an electrician for replacement of the may be powered by an external supply when obsolete outlet.
Page 4
DSP Bypass function in the 6200. The lows the user to select and load the eleven user-selectable sequential RC-1 may also be used with other MIDI controlled equipment to select Programs of the 6200. The RC-1 also makes provision for selection Programs 0 through 11.
(just as in the table). cable. The 6200 and RC-1 exchange MIDI information on pins #2 and #3. The 6200 provides power for the RC-1 on pins #1 and #7. Pin #7 MIDI is +V; pin #1 is ground. To preserve compatibility with other MIDI Channel devices, the remaining pins on the connector are not used.
2.) Is the 6200 operating? The RC-1 takes its power from the 6200. names entered with permanent markers usually remain forever. A 3.) If you use the RC-1 with a MIDI device other than the 6200, you must provide wise alternate label might be some sort of stick-ons produced by a an external 9 VDC power supply.
4. Write the RA number on the outside of the box. With respect to products purchased by consumers for personal, family, 5. Ship the unit to Symetrix, freight prepaid. We do not accept freight collect or household use, Symetrix expressly disclaims all implied warran- shipments.
Need help?
Do you have a question about the AirTools RC-1 and is the answer not in the manual?
Questions and answers