Motorola MOTORAZR V3T Motomanual page 43

entry modes
j or g
Your Primary text entry mode can
be set to any iTAP® j or tap g
mode.
p or m
Your Secondary text entry mode can
be set to any iTAP p or tap m
mode, or set to None if you don't
want a secondary entry mode.
W
Numeric mode enters numbers
only.
[
Symbol mode enters symbols only.
To set your primary and secondary text entry
modes, press a > Entry Setup in a text entry
screen and select Primary Setup or Secondary Setup.
Tip: WANT TO SHOUT YOUR MESSAGE?
Press 0 in a text entry screen to change text
case to no capital letters (U), next letter
capital (V with k, n, h, or q), or all
capitals (T with i, o, f, or l).
iTAP® mode
Press # in a text entry screen to switch to
iTAP mode. If you don't see j or p, press
a > Entry Setup to set iTAP mode as your
primary or secondary text entry mode.
iTAP mode lets you enter words using one
keypress per letter. The iTAP software
combines your keypresses into common
words, and predicts each word as you enter it.
basics 41