Installation; Antenna; Pc Setup - Electrohome 19 Instruction Manual

Antenna

Note:
Aerial connections: IEC (female)
Input impedance: 75 Ω unbalanced

PC Setup

1. Ensure both the PC and TV are powered OFF.
2. Connect a VGA and audio cable to the back of your computer.
3. Connect the other ends of the VGA and audio cables to the VGA and PC audio connections on the side of the LED TV.
4. Power on the TV, press source to switch to PC mode.
5. Power on the PC.
Note: This sequence is very important.

INSTALLATION

(Not included)
- 9 -
Twin lead feeder
Indoor antenna
CATV net
Outdoor antenna