Table of Contents
Advertisement
CHOOSING A DISCRIMINATION PATTERN
24
Pattern
Discrimination
In Coin & Treasure
Mode use
PATTERNS
to toggle between
Pattern 1, Pattern 2
and Pattern 3.
Iron Mask
Discrimination
In Prospecting Mode use
+
–
and
to adjust the
Iron Mask Discrimination
scale.
When the Iron Mask Level is set to 0,
the detector behaves the same as in
All Metal Pattern.
All Metal Shortcut
The X-Terra 70 has an All
Metal shortcut available
in both modes.
In Coin & Treasure Mode,
press
to toggle
ALL METAL
between the selected
Pattern and All Metal.
In Prospecting Mode,
press
to
ALL METAL
toggle between Iron
Mask and All Metal.
The All Metal Pattern
cannot be edited.
EDITING DISCRIMINATION PATTERNS
The Preset Discrimination Patterns may be
edited to create custom patterns.
Method 1 - to reject a specific
Target ID using an actual target
When detecting a target, a discrimination
segment will flash, indicating its position
on the discrimination scale and the
target's ID number will appear on the
LCD.
Press
to reject that Target ID.
ACCEPT REJECT
The discrimination segment and
icon
will appear to indicate that the detected
ID is now rejected.
Check that the Target ID has been
rejected by detecting again. There should
be no audio response (blanking) from that
target
.
(Detector Audio, pg. 17)
Method 2 - to reject a specific
Target ID using + –
+
–
Use
and
to scroll through and select
the ID you want to modify. The flashing
segment and the Target ID numbers will
indicate the selected ID.
Press
to either accept
ACCEPT REJECT
or reject that ID. The discriminated
segment and the
icon will appear if
rejected. The segment and the
icon
will disappear if accepted.
toggles between
ACCEPT REJECT
accepting and rejecting targets.
25
25
Hide quick links:
Advertisement
Table of Contents
