Wi-Fi Advanced Settings - Samsung Galaxy S II User Manual

Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a
glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point
(WAP).
Displays when there is a Wi-Fi access point
available but you are not connected to it. May also
display if there is a communication issue with the
target Wireless Access Point (WAP).
Displays when connected to another device using
Wi-Fi Direct. For more information, refer to "Wi-Fi
Direct" on page 153.

Wi-Fi Advanced Settings

The Wi-Fi settings - Advanced menu allows you to set
up many of your device's Wi-Fi service, including:
•
Setting your Wi-Fi sleep policy
•
Viewing your device's MAC Address
•
Configuring use of either a DHCP or Static IP
To access the Bluetooth Settings menu:
1. From the Home screen, tap
Wi-Fi Direct
Note: See your service plan for applicable charges for Wi-Fi
Settings Wi-Fi.
2. Press Advanced.
For more information, refer to "Advanced Wi-Fi Settings" on
page 111.
Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
Direct.
1. From the Home screen, tap
2. If Wi-Fi is off, tap the ON/OFF slider, located to the right
of the Wi-Fi field, to turn Wi-Fi ON
3. At the bottom of the Wi-Fi screen, tap the Wi-Fi Direct
button.
4. Repeat steps 1 - 3 on the other device you want to
connect with. The steps may be different on other
phone models.
5. On your phone, tap Scan.
The device scans for other Wi-Fi Direct devices.
Settings Wi-Fi.
.
ON
Connections 153