Installing The Card Holder - Panasonic KX-T7020E Reference Manual

Installing the Card Holder

The KX-T7130E, KX-T7020E and KX-T7050E are equipped with a card holder with a memory station card. Follow the
instructions below to install the card holder to the unit.
1
Match the marks the slide rails on the on the card
holder and on unit.
2
Push two shaded portions slightly and insert the edges of
the holder under the slide rails and then slide down in
direction of arrow "A".
Removing the card holder:
Push the card holder in the direction of arrow "B" while
keeping the tip of the holder pulling in the direction of
arrow "C".
19 Issue 2