Connections - Panasonic Viera TH-L42E6A Operating Instructions Manual

Connections

●
External equipment and cables shown are not supplied with this TV.
● Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
●
Check the type of terminals and cable plugs are correct when connecting.
● When using an HDMI cable, use the fully wired one.
●
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.
●
Also read the manual of the equipment being connected.
Terminals
Basic connections
Mains lead and aerial
Mains lead
(supplied)
AC 220-240 V
50 / 60 Hz
● Keep RF (aerial) cable away from the mains lead to avoid and minimise mains interference pickup.
●
Do not place the RF cable under the TV.
An aerial, correct cable (75 Ω coaxial) and correct terminating plug are required to obtain optimum quality picture and
●
sound.
● If a communal aerial system is used, you may require the correct connection cable and plug between the wall aerial
socket and the TV.
● Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial system for your
particular area and the accessories required.
● Any matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the customer.
1
6
5
■
Digital TV, Analogue TV
■
Mains lead
Insert the mains plug firmly into place.
●
When disconnecting the mains lead, be absolutely sure to
disconnect the mains plug at the socket outlet first.
1
USB 1 - 2 port
2 HDMI1 - 3
3
Aerial terminal
(see below)
2
4 AV1 (COMPONENT / VIDEO)
(p. 9)
5
DIGITAL AUDIO OUT
6 ETHERNET (p. 8)
3
4
Aerial
RF cable
7