Specifications; Emission Control - Shindaiwa AHS242 Owner's/Operator's Manual

Specifications

Model
Engine type
Dimensions (L x W x H)
Weight
Bore x stroke
Displacement
Fuel/oil ratio
Carburetor type
Fuel tank capacity
Ignition
Spark plug
Electrode Gap
Torque
Air cleaner type
Starting method
Stopping method
Transmission type
Cooling System
Blade Length
Cutter Drive
Gear Lubricant
Idle Speed
Clutch Engagement Speed
Wide Open Throttle Speed (W.O.T.)
Specifications are subject to change without notice.
This spark ignition system complies with the Canadian standard ICES-002.
Emission Control (Exhaust & Evaporative)
EPA 2010 and Later
The emission control system for the engine is EM (engine modification) and, if the second to last character of the En-
gine Family on the Emission Control Information label (sample below) is "C", "K", or "T", the emission control system
is EM and TWC (3-way catalyst). The fuel tank/fuel line emission control system is EVAP (evaporative emissions).
Evaporative emissions for California models are only applicable to fuel tanks.
An Emission Control Label is located on the engine. (This is an EXAMPLE ONLY, information on label varies by en-
gine FAMILY).
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
The 50 or 300 hour emission compliance period is the time span selected by the manufacturer certifying the
engine emissions output meets applicable emissions regulations, provided that approved maintenance proce-
dures are followed as listed in the Maintenance Section of this manual.
2-stroke, single cylinder, air cooled, gasoline engine
1682 mm (66.2 in) x 248 mm (9.76 in) x 245 mm (9.6 in)
50:1 with *ISO-L-EGD or JASO FD class engine oil
Automatic, centrifugal clutch w/bevel gear
IMPORTANT!
AHS242
5.99 Kg (13.2 lb)
33 x 28 mm/1.3 x 1.1 in.
23.9 cm /1.46 cu. in.
3
Diaphragm-type
.69 L / 23.3 oz.
One-piece electronic, C.D.I.
NGK BPMR8Y
0.6 mm/ .024 in.
150-170 kgf cm / 130 - 150 in • lbf
Non-reversible double layer felt
Recoil
Slide switch
Forced Air
568 mm/22.4 in.
Spur Gear
Lithium Based Grease
3,000 RPM
4,000 RPM
11,800 RPM
7