Wireless Installation - Kensington PilotMouse Optical Wireless Mini User Manual

Q4937_72314manual 11/23/04 4:50 PM
Technical Support
In North America, technical support is available to all registered users of
Kensington products. There is no charge for technical support except long
distance charges where applicable. Technical Support Contact information
can be found on the back cover of this manual.
Technical Support Tips:
• You may find the answer to your problem in the Frequently Asked
Questions (FAQ) section of the Support area on the Kensington Web
site: www.support.kensington.com.
• Call from a phone where you have access to your computer.
• Be prepared to provide the following information:
1. Name, address, and telephone number
2. The name of the Kensington product
3. Make and model of your computer
4. Your system software and version
5. Symptoms of the problem and what led to them
8 • PilotMouse Optical Wireless Mini
Page 8 (PANTONE 293 CV plate)

Wireless Installation

1
To establish a wireless connection:
The mouse must be turned on (with batteries) and the USB receiver plugged
into your computer, then press the connect button on the receiver (1). Next
push the connect button on the bottom of the mouse (2). If this does not work,
try repeating these steps, but hold the mouse closer to the receiver. This step
may need to be repeated 2–3 times for the mouse to synchronize.
Repeat this procedure when replacing the batteries.
IMPORTANT: This wireless device is similar to an FM radio, by adjusting
the antenna you can get better reception. You may also want to
experiment with different locations and positions of the receiver.
2
PilotMouse Optical Wireless Mini • 5