Radio; Using The System - Skoda Radio Swing Owner's Manual

Radio

Using the system

Change frequency range
Your device is capable of receiving a radio reception in the FM and AM analogue
frequency range.
Two storage groups are available for each of these frequency ranges, FM1/FM2/
FM3 and AM1/AM2/AM3. There are 6 memory slots available for each of these
groups.
›
To change the frequency range, press and hold the
FM or AM frequency range using the function key
›
Briefly press the button to change the storage group of the selected fre-
RADIO
quency range.
Searching for and storing radio stations
Manual search
›
Set the frequency of the desired radio station by turning the settings knob
» Fig. 1 on page 3.
2
Store station
›
After selecting the radio station, press the selection button
station should be stored and hold it pressed in until the radio station briefly
switches to mute and a brief signal sounds.
Automatic station finding with storing the radio stations
›
Press the button . An automatic station finding is started during which the 6
AS
stations with the strongest signal in the memory level FM3 and/or AM3 are stor-
ed.
When the process of storing the radio stations on the selection buttons
plete, you can press any selection button
Note
The stored radio stations of the current waveband are updated and stored once
again in the memory level FM3 and/or AM3 by repeatedly pressing the button
6
Radio
button and select the
RADIO
.
12
, on which the
12
is com-
12
to call up the desired radio station.
12
Function SCAN
The stations of a waveband can be played briefly one after the other (for ten sec-
onds).
›
By briefly pressing menu knob
searches for all available stations within the current waveband.
›
To return to the original radio station, press the selection button CANCEL
» Fig. 1 on page 3.
12
›
The automatic station search is terminated by pressing the function button OK
. The current radio station remains selected.
12
›
To choose other radio stations, press the selection button SKIP
RDS Function
Certain radio stations transmit additional text information - designated as radio
text.

›
The information of the radio text is displayed by pressing the button
Note
The text information must not be available to all radio stations.
■
Depending on the quality of the signal, the device may need some time in order
■
to load all the displayed characters.
Traffic news function
Switching on/off
›
Press the switch.
TP
The traffic service is deactivated by pressing the
 icon goes out.
Activating/deactivating traffic reports
Functional readiness of the traffic news service is indicated via the  icon.
During playback in Media mode, the last selected radio station that supports traf-
fic news will continue to be received in the background. If a traffic news station
has not been set recently, then the most appropriate traffic news station is set
automatically in the background. While searching for an appropriate station, TP
SEEK is displayed on the screen.
.
AS

» Fig. 1 on page 3, the device automatically
2
12
switch again. The displayed
TP
.

.
INFO

