Using Your Refrigerator; Ensuring Proper Air Circulation; Multi-Flow; Setting The Controls - LG LFC21760 Series User Manual

ENSURING PROPER AIR CIRCULATION

In order to ensure proper temperatures, air must flow
between the refrigerator and freezer sections. As shown
in the illustration below, air enters at top of the freezer and
circulates down. From the bottom of the freezer, air is
forced up to the top of the refrigerator. Air enters
refrigerator through the top vent, then circulates and
exists at the bottom, where it returns to the freezer.

MULTI-FLOW

• Multi-Flow means powerful and effective cooling
operation. This is especially noticeable when new food
is placed in the refrigerator compartment.
• If water or foreign substances enter the cool air vent
while cleaning, efficiency will be lowered. In addition, if
gasket is damaged, efficiency may be lowered because
of escaping cool air.
Do not block any of cool air vents with food packages.
If the vents are blocked, airflow will be interrupted and
temperature and moisture problems may occur.
IMPORTANT: Because air circulates between both
sections, any odors formed in one section will transfer to
the other. You must thoroughly clean both sections to
eliminate odors. To prevent odor transfer and drying out of
food, wrap or cover foods tightly. (See the Food Storage
Guide section for details.)

USING YOUR REFRIGERATOR

16

SETTING THE CONTROLS

• Your refrigerator has two controls that let you regulate
the temperature in the freezer and refrigerator
compartments.
• Initially set the REFRIGERATOR CONTROL at 37°F
(3°C) and the FREEZER CONTROL at 0°F (–18°C).
Leave it at this setting for 24 hours (one day) to
stabilize. Then adjust the compartment temperature
as desired.
• Refrigerator control: 33°F to 46°F (0°C to 8°C)
The lower the number setting, the colder the refrigerator
compartment will become.
• Freezer control: –6°F to 8°F (–21°C to –13°C)
When the setting is at a lower number, the freezer
compartment becomes colder. But the refrigerator
compartment becomes warmer because less cold air
flows into the refrigerator.
NOTE: If you want to off display, press and hold ICE
PLUS key and FREEZER key over 5 seconds at the
same time.
NOTE: Touch display once to activate, then touch again to
change the settings or activate a function. If 10 seconds
has passed since the display has been touched, it will be
necessary to touch "once" again to reactivate.
 This is to prevent accidental display setting changes.
• ICE PLUS:
Press the ICE PLUS key and the LED will turn on. This
function will remain activated for 24 hours and intensify
the cooling speed of freezer and increase the amount of
ice.
NOTE: If you want to change °F to °C, press and hold
COLDER key of freezer and COLDER key of refrigerator
over 5 seconds at the same time. and if you want to
change °C to °F, hold them for 5 seconds again.