Advent Touch Print All-in-One Printer Extended User Manual page 10

Networking Your Printer
5
The Wi-Fi connectivity LED blinks as the printer searches for available wireless
networks within range, then displays the list in order of signal strength. For example:
If there are additional networks than can be shown on the LCD, a
symbol appears in the bottom right-hand side of the display.
4.
If the name of your network is:
Listed
Press to select your
network, then press OK
5. If your network has security enabled, use the LCD keyboard (see
keyboard, page 7) to enter your security string (case-sensitive).
6. When the confirmation message appears, press OK .
When the printer is successfully connected, the Wi-Fi connectivity LED stops
blinking and remains lit.
The printer with a wireless connection is listed as the name of the printer plus
a number (for example, AdventTouchPrint+1133).
7. If you haven't installed the ADVENT All-in-One Printer Software:
a. Go to adventprintersupport.custhelp.com/app/go/aiodownloads.
b. In the search results, click the link for ADVENT All-in-One Printer Software
for your computer operating system.
c. Follow the on-screen instructions.
adventprintersupport.custhelp.com
Not listed
Make sure your wireless router is turned on and
within range. If your wireless router does not
.
broadcast its SSID (network name):
1. Press to select Unlisted Network, then press OK.
2. Use the LCD keyboard (see
keyboard, page 7) to enter your network name.
3. Select WEP or WPA/WPA2 as required for your
network's security setup, then press OK.
NOTE: If the name of your network is still not listed,
or you want to change your network, press
to select Rescan for Wireless Networks ,
then press OK .
(page down)
Using the LCD
Using the LCD