Basic Setup Complete; Wifi Ap Mode; Switch To Wifi Ap Mode - Sapido RB-1132 User Manual

4.4.4

Basic Setup Complete

The Basic Setup has been completed successfully when you see this screen.
4.5

WiFi AP Mode

As WiFi AP Mode, N+ Mini Broadband Router will be a bridge and support a wireless LAN.
NAT function is disabled under WiFi AP mode. The N+ Mini Broadband Router connects the
upper level device wirelessly and gets its assigned IP address. If not, the N+ Mini Broadband
Router will use the default IP or assigned by the user.
4.5.1

Switch to WiFi AP Mode

Switch to WiFi AP mode and plug in power.
Note: 1. Before sliding the switch modes, please power-off the router firstly. Moreover, please stay over 5 seconds
between power-off / power-on condition.
2. Switching the mode while power is on will make the router crush, and cause the hardware damage and
information lost.
http://www.sapido.com.tw
48
User Manual V1.0