LG SoundPlate 440 Owner's Manual page 32

32 Troubleshooting
PROBLEM
When you feel the
output sound of the
unit is low.
There is a noise on
the periphery of the
unit.
4
LAP440W_NE_BDEULLK_ENG.indd 32
CAUSE & CORRECTION
Check the details below and adjust the unit according to them.
y Switch [ON] state of DRC function to [OFF] by using remote controller.
y With the unit connected with TV, change the AUDIO DIGITAL OUT setting on TV
Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
y With the unit connected with Player, change the AUDIO DIGITAL OUT setting on
Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or [BITSTREAM].
y Change Audio DRC setting on Player setup menu to [OFF] state.
Depending on the type of the furniture where the unit is placed, you might hear a
slight noise from the furniture due to the dual subwoofers built within the product.
y Check the supporting furniture whether it is sufficiently firm and horizontal.
y However, if you still hear a noise, place a tablecloth between the unit and the
surface.
2014-04-08 9:17:56